Field

A probe from what the rule blocks

A balancing rule breaks the admissible set into pieces by blocking exchanges, so the quantity a diagnostic should be aimed at is the constraint's active set rather than the design's leverage — which is a heuristic about the same thing. Built from the design and the tolerance alone it is a real probe, well ahead of a random direction; it is also behind leverage at 4.4 paired standard errors. Counting the active set exactly, at a cost no trial can pay, makes it worse rather than better, so the approximation was never what cost it.
What the rule blocks is not where it splits. How much of the separating direction each probe carries, over 100 designs of 14 units whose admissible set is enumerated and split into two pieces. The deferral this field answers proposed the constraint's active set — which exchanges the tolerance box actually blocks — as a better probe than the design's own leverage, on the ground that leverage is a heuristic and the active set is the quantity. Modelled from the design and the tolerance, it reads 0.4272 against leverage's 0.5395, at 4.43 paired standard errors the wrong way. Counted exactly over the enumerated set — at a cost no trial can pay — it reads 0.3854, worse again. Both beat a random direction at 0.2622, so they are probes; neither beats the two the earlier field already had.

What the rule blocks

A balancing rule breaks the admissible set into pieces by refusing exchanges. Which exchanges it refuses is computable from the design and the tolerance alone, before any assignment exists — and it makes a probe.

A model of the active set, and the active set. Each of the 14 units of one design, at the share of its exchanges the tolerance box blocks — computed from the design's columns and the tolerance under a uniform position in the box, against counted over all 116 admissible assignments. The diagonal is where the two would agree. Over 192 designs they agree about the ordering of the units at a correlation of 0.8141 ± 0.0112, negative on 0.5% of them, and disagree about the level: 0.8442 counted against 0.8170 modelled, a gap of 0.0272 ± 0.0051. An admissible assignment does not sit uniformly in its box, and this is the size of that.

A model and a count

The share of a unit's exchanges a tolerance box refuses can be modelled from the design or counted over the admissible set. They order the units the same way at a correlation of 0.81 and disagree about the level by 0.027.

What each probe can see. How far apart the two components of the admissible set are on each probe, over the spread inside a component, on 100 designs whose set is enumerated and split. It is the population quantity a chain is trying to report. The separating direction itself reads 10.5646; the projected fourth power 5.0800, the design's own leverage 3.8362, the modelled active set 1.9529, the counted active set 2.0170 and a random direction in the same subspace 0.9422. The two active-set probes beat the random direction and lose to both of the earlier field's, which is the field's answer to the question that opened it.

A quantity that loses to a heuristic

Leverage is a heuristic about which units a balancing rule has most to say about. The constraint's active set is the thing the rule actually does. As a probe, the heuristic wins by 4.4 paired standard errors.

One of them is mostly leverage. How much of the design's own leverage direction each active-set probe carries, once both are standardised and projected off the rule's span — which is what a probe is, so it is the comparison that matters. Over 189 designs the modelled active set agrees with leverage at |r| = 0.8359 ± 0.0114 and the counted one at 0.4239 ± 0.0216. So the modelled probe is largely leverage under another name and the counted one is genuinely a different direction — and the counted one is the worse probe, at 0.3854 of alignment against 0.4272. What the active set contains beyond leverage points away from where the set splits.

Counting it exactly does not help

If a modelled active set lost because the model was crude, the exact one would win. It is computed at a cost no trial can pay, and it is worse — so the approximation was never what was costing the probe.

The pairing recovers most of it and passes nothing. How much of the separating direction each probe carries, over 100 designs of 14 units whose admissible set is enumerated and split in two. The four rows the pairing adds are the dominant direction of what each blocking matrix keeps past its degrees, and the cut that direction's signs induce. Counted, they read 0.5266 and 0.5258 against the counted per-unit share's 0.3854 — most of the gap between that share and the design's own leverage at 0.5395, closed. Modelled, they read 0.4274 and 0.4954 against 0.4272. Nothing built from the active set passes leverage, and the projected fourth power is still ahead of all of them at 0.6583.

A set of pairs, not a vector

The active set is a graph on the units, and every probe built from it so far has been its degree. Read as a graph it recovers 0.1326 of the alignment the summary lost — and draws level with leverage rather than passing it.

Separation, how far against whether. The median separation each probe carries between the pieces of a split admissible set, over the 100 designs whose set is split. The share refused per unit carries 1.953; the refusal pairing's direction 3.103, and with the saturated pairs dropped 2.917. The depth pairing's direction carries 2.345, and each unit's mean depth 3.836 — exactly the leverage's. A random direction carries 0.942 and the projected fourth power 5.080.

How far, not whether

The blocking matrix records whether a tolerance box refuses an exchange. Dropping the pairs it refuses for certain changes nothing. Recording instead how far each exchange moves the balance vector turns the pairing into its degree plus a part that lies inside the rule's own span — and the degree is the design's leverage, exactly. The heuristic that beat every reading of what the rule blocks was the unclamped pairing's degree all along.

All essays