Normal Distribution
nothing is called 95% until it has been counted
Concept

Attenuation — where it appears

The amount by which an estimate of a dependence falls short of the dependence itself, before any rule reads it. A sample mean removes some, a fitted model removes more, and a resampling’s window removes more again — so the sequence a procedure works from is short several times over.

Named by 10 essays across 6 fields — each of them below, with the objects they name alongside it.

The dependence, at four removes. Under AR(1) at 0.8, four different sequences all called the dependence. The top line is the law. The middle line is what a sample of 120 errors reports on average — computable exactly, because the expectation of a sample autocovariance is arithmetic once the covariance is known. The lower line is what a candidate's residuals report, which is what every two-step rule in this collection actually reads: a fit removes variance, and it removes more of the persistent part than of the rest. At the first lag the three are 0.800, 0.7773 and 0.7338. The dots are counted from draws and share no arithmetic with the line they sit on; the worst departure is 1.2 standard errors.

A dependence fitted with the line

Every whitening in this collection reads the dependence off a set of residuals, and residuals are not errors. Fitting the two together recovers most of what that costs, and changes almost nothing about the decision it feeds.

together · Dependence What a sample shows, and what the algebra does. The difference between a rectangular block's implied long-run variance and a trapezoidal one's, as a share of the truth. Above the axis the rectangle is less biased and below it the trapezoid is. The heavy line is exact — computed from the law's own autocovariances — and it crosses at 19.2. The others are what samples of 120, 240, 480, 960 rows report, and every one of them exaggerates whichever window is ahead: at ℓ = 20, where the exact difference is 0.28 points, a sample of 120 rows shows 4.31 points — 15 times larger. That is the number the earlier reading of this comparison was missing: three tenths of a point is what the algebra says and not what a hundred and twenty rows report.

The gap a sample shows

The exact difference between two block windows at a block length of twenty is three tenths of a point. What a hundred and twenty rows report is four and a third, because the autocovariances the window is applied to are attenuated too.

crossing · Bootstrap Which window is better depends on who chose the block length. The margin between a rectangular block and a tapered one, on 400 samples of 120 rows, under four rules for choosing the block length. At the length that would actually have been best on each draw the taper is ahead by 2.12 points of a 35.8% error, at 22.1 paired standard errors; at a length estimated from the sample's own persistence it is ahead by 1.89. At the length this field's own figures use — eight — the rectangle is ahead by 2.04, and at the rule of thumb by 4.54. Every rule sees the same draws. What separates them is the length: the two rules that lose to the rectangle pick 4.00 and 8.00 where the best available is 24.57, and a tapered window at a quarter of the right length has thrown away most of what it was weighting.

An ordering that depends on the rule

The tapered block beats the rectangular one at the best available block length and at one estimated from the data. At a length written into a protocol, and at the rule of thumb, the rectangle wins — at every sample size measured.

feasible · Bootstrap What a longer block buys and what it costs. A trapezoidal block at 120 rows, with the error split into the two things it is made of. The bias falls with the block length, because a longer block attenuates less, and it flattens at 23.2% because the sample's own autocovariances are short whatever window is applied to them. The spread rises with it, because a longer block means fewer of them. Their sum in quadrature has a minimum at ℓ = 16, which is not where either of the two has one. The faint line is the rectangle's total error, for scale: it is above the trapezoid's from ℓ = 12 onwards.

Bias is not the whole of it

A window that reaches zero at its ends attenuates less and uses less of each block. The block length that minimises its bias is not the one that minimises its error, and comparing two windows at one length compares one of them mis-tuned.

crossing · Bootstrap How much memory a fit takes out, candidate by candidate. Under AR(1) at 0.8, the lag-one autocorrelation a candidate's residuals report, computed exactly for each candidate on 200 draws. The upper line is the law at 0.8000. A candidate that is an intercept alone reports 0.7773 — which is exactly what a sample of 120 errors reports, because an intercept annihilates the sample mean and nothing else, and the two arithmetics agree to the last bit. Every predictor after that takes more out, down to 0.7341 at the fullest candidate. That is the collision this field is about: the rule every whitening here uses estimates its nuisance once, from the fullest candidate, so that the criteria stay comparable — and the fullest candidate is the one whose residuals report the least.

The fit that takes the memory out

A candidate's residuals report less dependence than its errors do, and how much less is arithmetic rather than noise. The rule used for a good reason reads the series that has lost the most.

together · Dependence Most of the rise is the optimiser's, and under one law it is not. The rise in log-likelihood from the tapered plug-in to the maximum over the same eight-lag band, beside what the same optimiser produces on a sample generated from the plug-in's own covariance — where the family is correctly specified by construction and there is nothing to find. Under AR(1) at 0.8 the raw rise is 5.72 and the manufactured baseline is 4.79, leaving 0.93 at 1.8 standard errors; under long memory the excess is 0.14, at 0.2. Under the moving average it is 11.87 at 19.4 standard errors, on every draw. The taper is a shrinkage, and it costs nothing where the sequence decays smoothly and a great deal where it stops dead.

The plug-in and the maximum

A tapered covariance estimate sits five and a half log-likelihood units below the maximum of the likelihood it is substituted into. Four fifths of that is what the optimiser would have found if nothing were missing.

family · Dependence A filled value is not an observation. What a 95% interval for the slope actually covers after each way of handling 35.0% missing outcomes, counted over 4000 studies of 200 rows. Dropping the incomplete rows covers 95.93%. Filling with the observed mean covers 13.85%, because the estimate itself has moved. Filling with a fitted value covers 80.85% against a closed prediction of 79.73%: the estimate is right and the reported standard error is short by a factor of 0.6567 against a predicted 0.6500, because the residual sum of squares is divided by the whole sample's degrees of freedom. Adding residual noise recovers the spread and covers 85.78% against a predicted 84.62%, since the interval still ignores the variance of having imputed at all.

One imputation is not an observation

Three ways of filling a missing outcome, under a mechanism that makes dropping the rows beyond reproach. Filling with the observed mean covers 13.85%, filling with a fitted value covers 80.85%, adding noise covers 85.78%, and the thing all three were meant to improve on covers 95.93%.

missing · Missingness Where the taper's case begins, and it is not where the algebra says. The block length at which a trapezoidal block's implied variance stops being more biased than a rectangular one's, against the length of the sample. Computed exactly — from the law's own autocovariances, with no sampling in it — the answer is 19.2 and does not depend on the sample at all. What a sample of 120 rows reports is 13.3, and the reported crossing walks out towards the exact one as the sample grows: 13.3, 15.0, 16.4, 18.0. The mechanism is that the autocovariances the window is applied to are themselves attenuated, worst at the longest lags, and the window that discards those lags loses less of them.

The error no window repairs

Every block window's best estimate of a long-run variance is wrong by about forty per cent at a hundred and twenty rows, and the largest part of that is not a bias at all. Choosing the window moves a twentieth of it.

crossing · Bootstrap Two groups, a baseline and a follow-up, and nothing happening in between — baseline reliability 0.6. 600 units in two pre-existing groups whose true means are 1.00 apart, read once at baseline and once at follow-up, with no change for anybody. The two groups' mean changes are −0.075 and −0.032, so the change-score analysis reports a group difference of 0.043. The regression of follow-up on baseline and group reports 0.409, against a closed form of (1 − λ) × 1.00 = 0.400: at any one baseline reading the two groups' lines sit that far apart, because each group's units regress towards their own group's mean. The pooled slope in this sample is 0.614, the baseline's reliability.

Two analyses of one baseline

Two groups read at baseline and again at follow-up, with no change for anybody. Subtracting the baseline reports a group difference of −0.0014 and adjusting for it reports 0.4008 — and each analysis is exactly right about one reason the groups started apart and wrong by 0.40 about the other.

paradox · Rtm The damage does not stay in the term that was left out. Where each coefficient lands when the model that fills the missing outcomes and the model that analyses them disagree, over 1500 studies of 200 rows at 35.0% missing and 20 imputations. An imputer that omits a covariate the analysis fits attenuates that covariate's coefficient by exactly the missing fraction — -0.1405 counted against a closed -0.1400 — and pushes the coefficient it did impute on the other way by exactly the product of the omitted coefficient, the covariates' correlation and the missing fraction: 0.0402 counted against 0.0420. Both closed forms come out of the same two-by-two solve. Matching models leave both alone, and so does an imputer that knows more than the analysis.

An imputation model the analysis does not contain

A model that fills the gaps without a covariate the analysis fits attenuates that covariate's coefficient by exactly the missing share, 0.4 to 0.26, and moves the one it did carry by exactly γρf, 0.6 to 0.642. The reverse case is supposed to inflate the interval, and at four strengths of the extra knowledge it does not.

missing · Missingness

Named alongside it

The objects these essays reach for when they reach for this one.

Closed formBiasMonte CarloSample autocovarianceTaperingBias-varianceBlock bootstrapBlock lengthDependenceLong-run varianceMean squared errorResampling

All concepts